Categories







Home > Buggy Frames and Chassis > Fiberglass Buggy Bodies and Chassis
Choose a sub category:
Genesis 4 Seat Buggy Nostalgia 4 Seat Fiberglass Buggy
Lancer 4 Seat Fiberglass Buggy Roadster T - 2 Seat Fiberglass Buggy
Sort By:
Page of 2
Fiberglass Floor Pan for Roadster T Chassis
Our Price: $510.33

The fiberglass floor features a ribbed design for added strength.   The shiny, black, gel-coat finish won't rust and doesn't need to be painted.   The tunnel on the Roadster-T chassis floor has been modified to relocate the shifter further back to compensate for the repositioning of the drivers seat further back on the pan, than in the VW Beetle
Fiberglass Floor Pan for Nostalgia Chassis
Our Price: $510.33

The fiberglass floor features a ribbed design for added strength.   The shiny, black, gel-coat finish won't rust and doesn't need to be painted. The floor comes standard with the Nostalgia Chassis.
Fiberglass Floor Pan for Genesis Chassis
Our Price: $635.00

The fiberglass floor features a ribbed design for added strength. The gloss black gel-coat finish will not rust and needs no painting.
Square Tube Chassis for Roadster T - 80"
Our Price: $1,365.26

The 80" wheelbase Roadster-T chassis & fiberglass floor was designed to compliment our own Roadster-T body. The roadster T chassis is designed to use VW type 1 running gear, 1958 thru 1978. Pre 1966 front ends will require shock mount modification. It's stronger than a stock pan, plus saves time and allows tunnel access from underneath that you don't get with a stock chassis.

The fiberglass floor features a ribbed design for added strength. The shiny, black, gel-coat finish won't rust and doesn't need to be painted. The tunnel on the Roadster-T chassis floor has been modified to relocate the shifter further back to compensate for the repositioning of the drivers seat further back on the pan, than in the VW Beetle.

The chassis is made of square tubing, with a 2" main frame & 1-1/2" infrastructure, adding an extra 1-1/2" of lift to the body for increased tire clearance. It features body mounting holes that are pre-drilled, sealed and recessed so that the bolts do not protrude below the chassis. Please specify when ordering whether you will be using stock VW pedals & master cylinder or a hydraulic pedal package.

Square Tube Chassis for Nostalgia - 80"
Our Price: $1,365.26

The 80" wheelbase Nostalgia chassis & fiberglass floor were designed to compliment the line of fiberglass bodies that Berrien Buggy manufactures.

The Nostalgia chassis is designed to use stock VW type 1 running gear. 1958 thru 1978 except super beetle. It's stronger than a stock pan, plus saves time and allows tunnel access from underneath that you don't get with a stock chassis. The Nostalgia chassis can be used with any body made to fit on a stock Beetle pan that has been shortened 14 1/2" and uses stock pedal placement.

The fiberglass floor features a ribbed design for added strength. The shiny, black, gel-coat finish won't rust and doesn't need to be painted. The chassis is made of square tubing, with a 2" main frame & 1-1/2" infrastructure, adding an extra 1-1/2" of lift to the body for increased tire clearance. It features body mounting holes that are pre-drilled, sealed and recessed so that the bolts do not protrude below the chassis. The clutch cable tube, master cylinder mount, pedal mount and seat track mounting brackets are all factory installed, as well as the four front clamps that weld to the chassis. In addition, the fiberglass floor is pre-drilled and bolted in place.

Nostalgia Body - Standard
Our Price: $1,568.88

The classic shape that started it all. The NOSTALGIA is our version of an old standard. A 2 seat buggy with room for a jump seat or storage. The NOSTALGIA body mounts on an 80" wheelbase chassis. The body comes standard with the hood fitted and mounted. Molded in fiberglass with a durable "gel coat" finish, the NOSTALGIA needs no painting. Choose from a large variety of "standard" colors or for an additional charge add some sparkle with a "metal flake" finish.

The NOSTALGIA can be mounted on a 14 1/2" shortened, VW beetle, floor pan, but, we suggest you purchase our jig built, square tube, NOSTALGIA frame. Our frame is built with new steel, and makes your build much easier, with a stronger frame, yet still uses standard VW Type-1 components.

Lancer Body - Standard
Our Price: $1,793.98

A classic buggy with a slightly different look. The LANCER is an 80" wheelbase body. A differently shaped hood, slightly raised fenders and an extended rear deck with a removable engine cover distinguish the LANCER.

It retains the NOSTALGIA dash, and overall dimensions. The LANCER is a 2 seat body with a rear jump seat or storage area. The body comes standard with the hood fitted and mounted. Molded in fiberglass with a durable "gel coat" finish, the LANCER needs no painting.Choose from a large list of "standard" colors, or, for an additional charge add some sparkle with a "metal flake" finish.

The LANCER also mounts on a 14 1/2" shortened VW floor pan, but, we suggest you purchase our jig built, square tube, NOSTALGIA frame. This frame is built using new steel tubing, and makes your build much easier, with a stronger frame, which still accepts standard VW type-1 components.

Square Tube Chassis for Genesis - 95 1/2"
Our Price: $1,925.00

The stock wheelbase (95 1/2") Genesis chassis and fiberglass floor was designed for use with our Genesis four seat body. It is considerably stronger than a stock VW floor pan. As well as allowing tunnel access from underneath, which you cannot achieve with the stock chassis.

The fiberglass floor features a ribbed design for added strength. The gloss black gel-coat finish will not rust and needs no painting. The chassis is constructed with new mild steel tubing, which are 2"x3" main rails & 1 1/2" infrastructure,(square & round), adding an extra 2 1/2" of body lift for increased clearance. The larger main rail tubing also adds increased strength to compensate for the longer wheelbase.

Threaded body mounting holes are provided for ease of mounting. The clutch cable tube, master cylinder mount,pedal mount and seat track mounting brackets are all factory installed, as well as the four front clamps that hold the VW front end assembly. In addition the fiberglass floor is pre drilled and bolted in place.

Nostalgia Body - Metal Flake
Our Price: $2,226.00

The classic shape that started it all. The NOSTALGIA is our version of an old standard. A 2 seat buggy with room for a jump seat or storage. The NOSTALGIA body mounts on an 80" wheelbase chassis. The body comes standard with the hood fitted and mounted. Molded in fiberglass with a durable "gel coat" finish, the NOSTALGIA needs no painting. Choose from a large variety of "standard" colors or for an additional charge add some sparkle with a "metal flake" finish.

The NOSTALGIA can be mounted on a 14 1/2" shortened, VW beetle, floor pan, but, we suggest you purchase our jig built, square tube, NOSTALGIA frame. Our frame is built with new steel, and makes your build much easier, with a stronger frame, yet still uses standard VW Type-1 components.

Genesis Body - Standard
Our Price: $2,399.00

The most frequently asked question, after our purchase of Berrien Buggy, was, " are you going to offer a 4 seat body?" Our answer was "yes, as soon as we can." It took us about 10 months, but here it is, the GENESIS ! Styled after our classis Nostalgia, the new 4 seat GENESIS body is great for family fun or a ride with friends. Using a stock VW Beetle, 94 1/2" wheelbase, the GENESIS requires no shortening of the chassis, making the build much less complicated. It does require the use of a re enforcing kit, mounted between the frame and body. The purpose of this kit is to give the necessary strength needed because of the longer wheelbase.

Better yet, purchase our new GENESIS FRAME. This frame is designed specifically for our GENESIS body. The GENESIS FRAME is jig built, using new steel, with a fiberglass floor pan. Patterned after our Nostalgia frame, the GENESIS FRAME uses 2"X3"X 1/8" mild steel tubing for the main frame rails, instead of the 2"X2" tubing of the Nostalgia Frame. By increasing the tubing size we have added the necessary strength the longer wheelbase requires. The GENESIS FRAME is designed to use standard VW Beetle components.